Jump to content


Photo
- - - - -

Wood Flooring


  • This topic is locked This topic is locked
4 replies to this topic

#1 989kipper

989kipper
  • Casita Club Member
  • 64 posts
  • Local time: 12:40 AM
  • Casita Model/Size:2010 Freedom Deluxe
  • Gender:Male

Posted 31 July 2017 - 02:03 PM

Those that have installed

#2 Tom Haberski

Tom Haberski
  • Casita Club Member
  • 163 posts
  • Local time: 10:40 PM
  • Location:Madison, WI
  • Casita Model/Size:1996 16' LD
  • Gender:Male

Posted 31 July 2017 - 04:29 PM

Huh? Your question is terse, to an extreme. What exactly are you asking?

I have installed laminate flooring in my rig. Wood looking, but composite material none the less.
Please ask your question in a full manner and sentence.

#3 989kipper

989kipper
  • Topic Starter
  • Casita Club Member
  • 64 posts
  • Local time: 12:40 AM
  • Casita Model/Size:2010 Freedom Deluxe
  • Gender:Male

Posted 01 August 2017 - 01:09 AM

Sorry I hit the wrong button and posted this by accident. I am wondering what flooring people use and how they terminate at the door.

#4 Hot Toddy

Hot Toddy
  • Casita Club Member
  • 504 posts
  • Local time: 11:40 PM
  • Location:Dallas, TX
  • Casita Model/Size:2013 Spirit Deluxe - 17'
  • Interests:Camping, hiking, cooking, gardening, and yoga.
  • Gender:Male
  • Trailer Name:Kerouac

Posted 01 August 2017 - 07:21 AM

I installed vinyl planks from Costco. I drilled out the rivets on the threshold and placed the threshold over the vinyl plank. You will need longer rivets to replace or switch to wood screws. A couple of tips: leave the carpet as it is the perfect thickness of an under layer, and be sure to leave the recommended 1/4" space between the edge of the plank and the wall so the floor floats.

 

Toddy



#5 JaxDan

JaxDan
  • Casita Club Member
  • 224 posts
  • Local time: 12:40 AM
  • Location:Beverly Hills, Florida
  • Interests:Golf
    Bluegrass Music (fiddle)
  • Gender:Male
  • Trailer Name:Cassandra (Cassie)

Posted 26 February 2018 - 06:18 AM

I am considering installing a cork flooring that should be non slip.  I think removing the carpet could be a demanding exercise but wondering if leaving it in place would invite mold formation.  Anyone have an opinion?

 

Also, from the age of my 17 SD some of the doors have expanded on their bottoms.  The half inch paper faced particle board is half inch thick.  The flooring is 3/8 inch and could be a replacement for some of the upper cabinet doors using 1/8 shims for the hardware.  Has anyone out there found a better replacement?  I already built a replacement for the bathroom door and made the trailer 10 pounds lighter.