Kitchen Sink Faucet Possible Problem
Posted 07 July 2016 - 03:35 PM
Posted 07 July 2016 - 05:06 PM
If it has separate hot and cold valves on it, then it obviously has separate hot and cold supply lines to the faucet assembly. No it doesn't have separate isolation valves under the cabinet like household sinks have. Just disconnect the water supply (city water) and bleed the pressure off before disconnecting and/or changing it out.
If it is bad, why not buy a "gooseneck" faucet, that will put the spout higher, to replace it with. Any standard big box store 4" faucet assembly will drop right in. It'll give you more room underneath it to actually get a pot under it than the crappy little short factory installed one.
Edited by Euphoria, 07 July 2016 - 05:14 PM.
- Wally Z likes this
"If I have seen a little further, it is by standing on the shoulders of giants."
Sir Isaac Newton
Greg & Brenda
2008 17' Casita Spirit Deluxe
Casita Club # 2754
Posted 07 July 2016 - 06:01 PM